Frequently Asked Questions about our system

Below are some of the most common questions asked by our customers. If you have any other questions about our products or service offerings, please call us at +1-888-803-5463 or Contact Us


What finish options are available?

We offer a wide range of finish options such as tempered or laminated glass with a composition of clear float or low iron. As well as premium glass options, aluminum finish, and solid panel. We can cater to a custom finish options that meet decor requirements. 

All available finish options can be seen here. 

Can Glass Skin be used alongside Glass Acoustic or PA 100 Opaque?
Yes it can. We have connectors to make the connections. Either at a 180° or 90° angle.
Can Line Systems be moved/relocated?

All Line Systems are demountable, which means they can be relocated.
Frameless systems such as Glass Acoustic and Glass Slim don’t have the same level of reusability as our modular systems (Glass Skin and PA 100 Opaque).

Frameless systems have elements of the system that won’t be reusable after uninstalling, that in most cases new glass panels will have to be ordered. For our Modular systems almost 100% the the elements of the system are reusable after uninstalling.

Based upon the project and set up, a full room can be disassembled and reassembled in hours, effortlessly.

Can I use Glass Slim which has a 50mm (2") width with one of your other Partition Systems that have 108mm (4 1/4")?

For each project we try to come up with tailor made solutions whenever they are needed, such as this type of connection. This type of connection need to be analysed on a project-by-project basis, but most of the times it is possible with an made to measure aluminium tube to make the transition from a 50mm (2″) to a 108mm (4 1/4″) wide partition

Is the hardware for Line Systems doors limited to the standard offering?
No it isn’t. The standard hardware set for each door is a range of hardware that has been tested for each door that we can guarantee works. If a new piece of hardware is needed for a project, we can test it first to see if it is compatible with the door.

Hardware tests take typically between 2 to 5 weeks and a physical sample will be required along with full AutoCAD and technical data.

Can I use manual blinds on Glass Acoustic?
No. You can only use electric blinds on Glass Acoustic.

Our Newsletter